Etc Source Four XT HID Zoom User Manual Bedienungsanleitung PDF herunterladen (Seite 15)

Adjusting the Angle

The Source Four XT provides the capability to adjust the fixture angle.

• The standard yoke provides +12 to -7° horizontal tilt when ground-mounted.

• The standard yoke provides +45 to -40° when bracket or pole mounted.

• The optional long yoke allows +90 to -35° fixture angle, including straight up or down

aiming.

Figure-12 Yoke Locking Screw.

Step 1: Using an 8mm hex wrench, loosen the two yoke locking screws.

Do not remove them.

Step 2: Tilt the fixture to the desired position.

Step 3: Tighten the two yoke locking screws to secure in position.

Yoke locking screw

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Etc Source Four XT HID Zoom User Manual Bedienungsanleitung Seite 15