Etc Source Four XT HID Zoom User Manual Bedienungsanleitung PDF herunterladen (Seite 14)

12 Source Four XT HID Zoom User Manual

Step 3: Adjust the focus lens if needed. See Focusing the Beam, page 8.

Step 4: Reinstall the barrel.

Adjusting Shutters

Use the shutters to shape the light beam. For example, you may want to use them to block the light

from falling on part of a building. Or you may want to frame a sign. The shutters are held in place

by a spring shutter retention system. You do not need to tighten or loosen the screws to make

adjustments.

Step 1: Remove the barrel as described in Removing and Installing the Barrel, page 7.

Step 2: Turn the Source Four XT on and aim it at the structure you are illuminating.

Step 3: Pull the shutters outward so that the aperture is fully open.

Figure-11 Shutters and Their Tabs.

Step 4: Use the tabs on the shutters to move them to block the beam as needed.

Keep in mind that the blocking is reversed.

Step 5: Reinstall the barrel.

Shutters

Shutter tabs

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Etc Source Four XT HID Zoom User Manual Bedienungsanleitung Seite 14