Etc Source Four LED v1.6.0 User Manual Bedienungsanleitung PDF herunterladen (Seite 74)

68 Source Four LED Profile v1.6.0 User Manual

OverTemp

You can change how an over-temperature situation is indicated in order to control stray

light.

Visible (Lustr+, Series 2 Lustr, and Studio HD)

The fixture produces a low-level, red light from the LED array, displays a warning message

on the LCD, turns on the LCD backlight, and turns on the error indicator light.

Visible (Daylight and Tungsten)

The fixture produces a low-level light from only some of the LEDs in the LED array, displays

a warning message on the LCD, turns on the LCD backlight, and turns on the error indicator

light.

Dark

The fixture turns off the LED array entirely and displays a warning message on the LCD

without turning on the LCD backlight.

Step 1: With OverTemp selected, press [].

Figure-3.42 Setting Over Temperature Indication.

Step 2: Continue to press [] to toggle between the two options.

Step 3: Press [] or []to commit the option.

For more information, see Thermal Shutdown Warning, page 39.

Restore Defaults

You can restore the fixture to the factory settings. This function clears all custom settings

including all changes to Presets and Sequences.

Step 1: With Restore Defaults selected, press [].

Step 2: When asked if you are sure, select Yes and press [].

Step 3: Press [].

Note:

When returning to normal operation, after the fixture has been in a shut-down status,

the LED array automatically transitions its output back to the current control signal

or stand-alone operation over a 10-second crossfade. There is no required reset

function once the fixture temperature returns to a safe level.

Local Settings

Backlight: 100%

BLght time out: 1 min

Language: English

Status Indicators: Off

OverTemp: Visible

Restore Defaults

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 99 100

Keine Kommentare

Etc Source Four LED v1.6.0 User Manual Bedienungsanleitung Seite 74