ETC Source Four LED Series Bedienungsanleitung PDF herunterladen (Seite 53)

3 Operation 48

DMX Profile

The current DMX profile is displayed on the DMX Settings menu. You can customize the

setting by selecting a different profile. For detailed information about each profile, see

Profiles, page 29.

Step 1: On the DMX Settings menu, scroll to DMX Profile.

Figure-3.5 Selecting DMX Profile on the DMX Settings Menu.

Step 2: Press [Enter] to set the desired profile.

Strobe

Strobe adds another DMX channel of control at channel 5 (or channel 9 when operating in

Direct Control profile). When enabled, the Strobe channel controls the fixture output as

follows.

Step 1: On the DMX Settings menu, scroll to Strobe.

Figure-3.6 Enabling Strobe on the DMX Settings Menu.

Step 2: Press [Enter] to toggle between Enable and Disable.

Step 3: Press [Up] or [Down] to commit the option.

DMX Value Strobe Effect

0 Full on

1 to 254 Variable rate from slow to fast

255 Full on

DMX Settings

DMX Start Address: 101

DMX Profile: HSIC

Strobe: Enabled

Data Loss: Instant

Plus Seven: Enabled

DMX Profile: 6 chan

3/15 Saturatio n

DMX Settings

DMX Start Address: 101

DMX Profile: HSIC

Strobe: Enabled

Data Loss: Instant

Plus Seven: Enabled

DMX Profile: 6 chan

5/15 Strobe

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 95 96

Keine Kommentare

ETC Source Four LED Series Bedienungsanleitung Seite 53