Etc Element v2.1.0 Bedienungsanleitung PDF herunterladen (Seite 208)

196 Element User Manual

Park Values from the Park Display

You can park and unpark channel parameters or addresses from the park display. Open the display

by pressing [Park]. While in this display, it is assumed that you want to park channels or

parameters, therefore the use of the {Park} softkey is not necessary when parking, but is used for

unparking. You can also use [At] [Enter] to unpark.

Following are examples for parking channel parameters from the park display:

• [3] [At] [4] [5] [Enter] - parks channel 3 at 45%.

• [3] {Color Palette} [4] [Enter] - parks color for channel 3 at color palette 4.

Following are examples for clearing parked values while in the park display:

• [channel list] {Park} [Enter] - unparks channels in the list.

• [channel list] [At] [Enter] - unparks channels in the list.

Below are examples for parking addresses in the park display:

• [Dimmer/Address] [5] [At] [5] [0] [Enter] - parks address 5 at 50% intensity.

• [Dimmer/Address] [5] [At] [Enter] - unparks address 5.

When parking a range of addresses in the Park display, using [Thru] will only park the intensities.

If you want to park all of the addresses and parameters within the selected range, you will need to

use [Thru] [Thru].

• [Dimmer/Address] [5] [Thru] [2] [5] [Enter] - parks only the intensities of addresses 5 thru

25.

• [Dimmer/Address] [5] [Thru] [Thru] [2] [5] [Enter] - parks all of the parameters of addresses

5 thru 25.

Parked addresses

Parked channels

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 317 318

Keine Kommentare

Etc Element v2.1.0 Bedienungsanleitung Seite 208