Etc Source Four Mini LED Bedienungsanleitung PDF herunterladen (Seite 8)

Shaping the Beam

The beam can be shaped using the four shutters or with a pattern.

The Source Four Mini LED has four

shutters: left, right, top, and bottom. Each

shutter can be pulled out or pushed in to

create the desired beam shape.

Color Frame Holder

The Source Four Mini LED comes equipped with a 2 ¾” or 70mm color frame,

which is a metal frame used to hold color media (often referred to as gel) in front of

the lens. The color frame holder is equipped with a retaining clip that prevents the

color frame from falling out.

1” Diameter

Pattern Projection

The Source Four Mini LED has a pattern holder slot

on the top side of the shutter barrel, in front of the

shutter. It accommodates a E-size (37.5mm with a

25.4mm image area) pattern holder.

Use an optional donut in the color frame holder to

enhance pattern projection.

When the slot is not in use, a small sheet metal cover

secured with a Phillips screw prevents light leakage.

Step 1: Use a Phillips screwdriver to loosen the

screw on the slot cover. Do not remove the

screw.

Step 2: Slide the cover completely forward to

expose the slot.

Step 3: Insert the pattern holder.

Step 4: Slide the slot cover back toward the

shutters until it meets the pattern handle.

Leave enough space to move the handle.

Step 5: Secure the slot cover by tightening the

screw.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Etc Source Four Mini LED Bedienungsanleitung Seite 8