Etc Source Four Mini Canopy and Track Mount Bedienungsanleitung PDF herunterladen (Seite 2)

ETC Installation Guide

Source Four Mini

Source Four Mini Canopy and Track Page 2 of 2 Electronic Theatre Controls, Inc.

Step 6: Using the canopy screws, secure the fixture to the mounting plate,

while keeping in mind the alignment in Step 5.

Step 7: Open all of the shutter blades

by sliding them outward until

they stop.

Step 8: Install gobo and/or gel as

desired and confirm that they

are properly secured.

Step 9: Restore power at the main

fuse.

Step 10: Focus the fixture as desired.

Track Installation Procedure

Step 1: Insert the track adapter

into the track. The

adapter will only fit one

way into the track with the

tabs of the adapter in the

groove of the track.

Step 2: Lock the adapter into

place.

Step 3: Select circuit 1 or 2 using

the circuit selection wheel.

Step 4: Focus the fixture.

Step 5: Lock the fixture into place using the yoke lock.

WARNING:

To reduce the risk of fire and electric shock, use only with

EUTRAC track system.

AVERTIR:

Réduire le risque de feu et la décharge électrique, l'usage

seulement avec le systéme de piste d'EUTRAC.

CanopyCano

Yoke Stop BracketYoke Stop

Bracket

Ground WireGround Wir

Mounting PlateMoun

ting P

late

LockLock

TabsTabs

Circuit Circuit

Selection Selection

WheelWheel

There are posts on both the yoke

lock and the yoke that will prevent

the fixture from rotating all the

way around to protect the cable.

The yoke can be locked into

place using a 1.5mm Allen

Wrench.

1 2

ETC Installation Guide 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Etc Source Four Mini Canopy and Track Mount Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Etc Source Four Mini Canopy and Track Mount